Innovative Electronics

PACKAGES AVAILABLE 
SMA
SMC
SOD80
SOD123
SOD323
SOT23
SMB

 Surface Mount Diode (SMD) is a compact electronic component soldered directly onto circuit boards. Its small footprint allows for sleek, efficient designs in modern electronics. By streamlining energy flow, SMDs are crucial in devices we use daily.

PACKAGES AVAILABLE 
SMA
SMC
SOD80
SOD123
SOD323
SOT23
SMB

 Surface Mount Diode (SMD) is a compact electronic component soldered directly onto circuit boards. Its small footprint allows for sleek, efficient designs in modern electronics. By streamlining energy flow, SMDs are crucial in devices we use daily.

PACKAGES AVAILABLE 
SMA
SMC
SOD80
SOD123
SOD323
SOT23
SMB

 Surface Mount Diode (SMD) is a compact electronic component soldered directly onto circuit boards. Its small footprint allows for sleek, efficient designs in modern electronics. By streamlining energy flow, SMDs are crucial in devices we use daily.

The LM358ADR is a dual operational amplifier that provides excellent performance for cost-sensitive applications. With low quiescent current and high ESD protection, it is optimized for a wide range of rugged industrial and consumer electronics applications. The common-mode input range includes ground, making it highly versatile for direct sensing applications.Features:Supply Voltage Range: 3V to 36VQuiescent Current: 300 μA per channelUnity-Gain Bandwidth: 1.2 MHzCommon-Mode Input Voltage Range: Includes ground, enabling direct sensing near groundInput Offset Voltage (Maximum at 25°C): 3 mVInput Bias Current: 20 nA (typical) / 250 nA (maximum)Collector-Emitter Saturation Voltage: 500 µV typicalOperating Ambient Temperature: -40°C to 85°CESD Protection (Human Body Model): 2 kV

74HC series ICs are High-speed logic gates with very low power consumption that utilize advanced silicon-gate CMOS technology and 74HC04 is one of them. 74HC04 ICs contain 6 independent Inverter. The boolean expression can be written as Y = A’ for each NOT gate.
The 74HC04 ICs have a wide operating range of VCC from 2 V to 6 V. Maximum current consumption is 20 uA through Icc and 1 uA per input pin. And the propagation delay is 8-9 ns. They can drive 10 LS-TTL loads at a time. Which means that the single output pin of NOT gate can drive 10 TTL based Low-Power Schottky( LS ) input pins. They can provide 4 mA on outputs at 5 V VCC. They allow inputs and outputs up to VCC. Recommended operating VCC is 5 V. Load Current can reach up to 25 mA per output pin and 50 mA for overall pins in between 0 V to VCC. 

These devices consist of two independent, high-gain, frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.

Features:

1. Wide supply voltage ranges
2. Low supply-current drain independent of supply voltage
3. Common-mode input voltage range includes ground, allowing direct sensing near ground
4. Low input bias and offset parameters
5. Internal frequency compensation
6. Applications: Sensing & Instrumentation, Communications & Networking, Audio.